ForBruce
Senior Member
- Joined
- Dec 21, 2020
- Messages
- 273
ERROR SUBJECT LINE--should be without going under the belly
--on a Solitude 378mbs.
my kitchen sensor always read 3/4 full. Even when emptied.
I tried something (home brew ) and it seems to work
in a five gallon pail of warm water, mix one entire box of calgon bath beads with 1-entire gallon of Pine-sol cleaner..
Fill kitchen gray tank almost 3/4 full of cold water . (you have to guess this one)
now add the entire 5-gall bucket you just made. (bucket is last to hold suds level down )
fill tank to full reading with water .
Now drive to storage area or drive around for about 5 miles.
Now let the mixture stand for about a week.
fill gray shower tank to full.
Empty kitchen gray tank
put the cap on drain pipe (or close valve just before drain hose)
open shower gray tank and let water back flow into kitchen gray
hopefully the shower flow reverses the normal flow at the sensors and peels off some debris.
now drain the kitchen gray....and give a little time for the sensor to dry.
worked for me and restored normal sensor indication
--on a Solitude 378mbs.
my kitchen sensor always read 3/4 full. Even when emptied.
I tried something (home brew ) and it seems to work
in a five gallon pail of warm water, mix one entire box of calgon bath beads with 1-entire gallon of Pine-sol cleaner..
Fill kitchen gray tank almost 3/4 full of cold water . (you have to guess this one)
now add the entire 5-gall bucket you just made. (bucket is last to hold suds level down )
fill tank to full reading with water .
Now drive to storage area or drive around for about 5 miles.
Now let the mixture stand for about a week.
fill gray shower tank to full.
Empty kitchen gray tank
put the cap on drain pipe (or close valve just before drain hose)
open shower gray tank and let water back flow into kitchen gray
hopefully the shower flow reverses the normal flow at the sensors and peels off some debris.
now drain the kitchen gray....and give a little time for the sensor to dry.
worked for me and restored normal sensor indication
Last edited by a moderator: