Furrion 14.5k A/C Shroud 2600RB

[RV2600RB]

Hi,
I have a few questions regarding my A/C.

1. Is the evaporator accessible by removing the A/C shroud?
2. Where is the freeze sensor supposed to be mounted? The freeze sensor was just sitting under the evaporator fins. I've looked and there is no evidence it was ever mounted on the evaporator.
3. What tools are needed to remove the A/C shroud (phillips, flat, torx, square drive, etc)?

Thank you for any light you can shed on this subject.
Rich

 

[jleonard]

I removed mine last fall to diagnose and do a repair. I think they were Phillips screws.
The rear mounts on mine ( the cover) were broken so i had to improvise and make some brackets.

 

[RV2600RB]

I removed mine last fall to diagnose and do a repair. I think they were Phillips screws.
The rear mounts on mine ( the cover) were broken so i had to improvise and make some brackets.

Thank you!

 

[UtahBear]

My freeze sensor was just wafting in the breeze also. In other words it was just laying in the space above the filter. Research seems to indicate it should be pushed into the fins about half way or more up. Hope that works.

 

[RV2600RB]

My freeze sensor was just wafting in the breeze also. In other words it was just laying in the space above the filter. Research seems to indicate it should be pushed into the fins about half way or more up. Hope that works.

Thank you. I’ll give that a shot.
Rich