Furrion AC Temp Sensor Relocation: Alternative, parts-free method

Need a little help...We are in a 2025 model with the Furrion AC's. I'm not finding the extra wires in the AC. Any ideas?

Red

You may or may not have the extra conductors. Some did, some didn't.
Remove the "thermostat" from the wall (lefty loose) and look for 3 conductors that are not connected to anything. You may need to pull the wires out of the wall some.
Rich
 
In addition to the great description regarding the thermostat……
At our roof air conditioner, I followed the wires back into a big glob of clear silicone RTV. I carefully pulled the RTV loose, and was able to see wires in the ceiling. Good luck!
 
Hello! Late to the party here, but I have installed RV Airflow Systems into both of my units and as this essentially forces all the air into the vent system, it seems to have solved this problem as well with no real mods wiring wise, plus as a bonus really forces more air into the other rooms / bunk room! So the Temp reading is still in the intake, but no cross contamination from the output with the RV Airflow it seems. Figured I would toss it out there. Only one season in with our 324MBS, but thought I would add that as an option to kind of solve two problems. Cheers!
 
I had a tech come out (GD paid the bill) to check the AC out, and everything pretty much worked as
it was supposed to.....but I've since added a 'KoolRV' duct (similar to the AirFlow) and have the sensor poking through the filter vent. This seems to work ok, and doesn't short cycle like it used to.....
I also switched out the thermostat with a 'Easy Touch' which may or may not help.....
 

New posts

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom