Furrion Camera

[Stoner61]

My camera for some reason is not syncing with the monitor. Never had this happen until today. Anyone know how to reset and sync the camera to the display in the truck? Thanks

 

[ajg617]

My camera for some reason is not syncing with the monitor. Never had this happen until today. Anyone know how to reset and sync the camera to the display in the truck? Thanks

I just had to replace my monitor - darn thing always had a rattle internally that I think was the antenna connection to the board. Check to see if the camera has power - with your headlights or running lights on, you should see a blue LED light up at the bottom of the camera. If it is lit, the problem may be in the monitor itself. Without pulling the camera, I was able to sync the new monitor by pushing a small rubber button on the bottom of the camera while someone pushed the sync button on the monitor. It worked - didn't have to physically tether the camera to the pigtail on the power cord.

 

[Stoner61]

Thank you so much. I will try that.

 

[ajg617]

Thank you so much. I will try that.

As I found out today (had to replace my monitor), press the pair button for the camera on the monitor screen and then just momentarily press the rubber button on the camera. I pushed the button and held it down so it kept pairing and unpairing.

 

[Stoner61]

Working now

I just had to replace my monitor - darn thing always had a rattle internally that I think was the antenna connection to the board. Check to see if the camera has power - with your headlights or running lights on, you should see a blue LED light up at the bottom of the camera. If it is lit, the problem may be in the monitor itself. Without pulling the camera, I was able to sync the new monitor by pushing a small rubber button on the bottom of the camera while someone pushed the sync button on the monitor. It worked - didn't have to physically tether the camera to the pigtail on the power cord.

Everything is now working again. Thanks a million for the help.

 

[Wrench-MGRV]

I just purchased a 2024 GMC 3500 truck & I have a Solitude 310. My Furrion camera keeps losing signal. Do some research & it relates to the LED Lighting Power system in the GMC. Was advised to get a trailer plug in jumper cable. Anyone else having this problem My head lights have to be on to get a signal. Worked perfectly on my 2015 Dodge Ram 2500. Thanks for info

 

[Second Chance]

Thread moved to Electronics.

Rob