Hall effect Sensor for electric motor

[Eaglesionu]

Hi,
Has anyone been able to find a replacement hall effect sensor for a lippert ground control 3.0 electric leveling motor? I had a tire blow and rip the wires out of the sensor. The motor is fine, just the hall effect sensor (the three smaller wires at the motor.) I’d rather
Not purchase an entire motor when all I need is the sensor.

 

[Eaglesionu]

The trailer is a 2017 grand design Reflection 323BHS. Here is a link to grand design for the replacement motor. https://www.granddesignrv.com/owner-support/parts/detail/23922

 

[Scocciante]

Call Lippert they are great 574-537-8900

 

[geotex1]

I think, unfortunately, you are going to find that you will either need to pull the motor housing off and see if you can figure out who Lippert sources the sensor from or bite the bullet and buy the motor assembly. When myself, GD, and Lippert were chasing gremlins in my GC 3.0 system, I learned very early on the motorheads are considered non-serviceable by Lippert.

 

[Capt Jim]

If it's just broken wire connections, a competent electronics repair shop may be able to repair it. I have had the Hall effect wires break away on the Schwintek slide motors and got them repaired for $25 compared to a $200 new motor.
Safe Travels.