Has any one put a Dometic 320 into a 2600RB?

[TheGuy]

I'm tired of the tiny terlit in my 2600rb and have been looking at the dometic 320 for a while. I'm wondering if anyone has done that before and felt like the extended bowl was too much for the space.

 

[Soundsailor]

Have you looked at the 310, it has a lot of the good features of the 320 but fits well in smaller places.

 

[TheGuy]

I really want the extended bowl and full rim. I'm not 100% certain, but I think the 310 is what's in there now. The bathroom on the 2600RB is big, but I was just curious if anyone had done it.

 

[tpaige]

We replaced our OEM toilet with the Dometic 320 and are happy with that decision. It's taller and elongated, much more comfortable. We have a 2022 310GK-R 5th wheel and it fit, no problem. We have changed out the ball seal a couple of times over the past 1.5 years, but you can do it without having to remove the bowl, which is good.

 

[TheGuy]

We replaced our OEM toilet with the Dometic 320 and are happy with that decision. It's taller and elongated, much more comfortable. We have a 2022 310GK-R 5th wheel and it fit, no problem. We have changed out the ball seal a couple of times over the past 1.5 years, but you can do it without having to remove the bowl, which is good.

Cool. I think I'm gonna pull the trigger and do it.

Did order it online? I'm a little worried about shipping damage. Not sure I'm worried enough to pay a $60 Premium to CampingWorld to get it locally though.

 

[tpaige]

We did order online from Amazon, no shopping charges. It arrived undamaged.

 

[TheGuy]

We did order online from Amazon, no shopping charges. It arrived undamaged.

Thanks!

 

[rfifer]

We replaced the original toilet with a Dometic 320 in a 2970RL. It is much more comfortable for us than the original. With regard to the installation, it is important to measure from the back wall behind the toilet to ensure sufficient space for installation. From the instructions, there must be 11” distance from the back wall to the center of the flange. If you have that distance, then the toilet should fit.

 

[440scout]

FYI, make sure there is at least 11" of room from the toilet mounting bolts to the wall behind the toilet if your installing the Dometic 320.

 

[Spankman72]

I'm tired of the tiny terlit in my 2600rb and have been looking at the dometic 320 for a while. I'm wondering if anyone has done that before and felt like the extended bowl was too much for the space.

I just upgraded 2 in our solitude 373fb. We have the half bath on the lower floor. I was worried that it might be too big. Fits fine and still plenty of room, and that is a very small bathroom. Wish I did it when I first bought the trailer.

 

[RV2600RB]

Thinking about this as well.
Rich

 

[SheepRancher]

Looking for update, have 2020 2600RB, with the toilet at 45 degree angle rotation from wall. How did the upgrade job go. Have to replace the screw down floor flange to the dometic brand ?

 

[TheGuy]

Looking for update, have 2020 2600RB, with the toilet at 45 degree angle rotation from wall. How did the upgrade job go. Have to replace the screw down floor flange to the dometic brand ?

Alas, life got in the way and I still haven't done it.

 

[Hit Factor]

Looking for update, have 2020 2600RB, with the toilet at 45 degree angle rotation from wall. How did the upgrade job go. Have to replace the screw down floor flange to the dometic brand ?

Floor flange should not need replacing. The manual for the 320 has detailed measurements and maybe even a cutout template. Take a look at that. The 320 fit fine in our 2500rl.

 

[TexasBadger]

Did you have to do any modifications to get the toilet to fit? I have a 2023 2970rl and want to swap the toilet out.

 

[440scout]

Did you have to do any modifications to get the toilet to fit? I have a 2023 2970rl and want to swap the toilet out.

The back of the 320 toilet is straight across so if the wall behind the toilet is the same and you have at least 11" from the mounting bolts to the wall it should fit. That's what the instructions call for. I suppose the model 310 is the way. I installed a 320 in a Solitude 310gk and there was just enough room.

 

[Spankman72]

I have a Solitude 373fb with the downstairs bathroom. The toilet sits at 45 degree. I replaced it with the 320, and had zero clearance issues and the flange bolts aligned perfect. Not sure if that will help at all. Good luck!