Hitch cover for B&W Companion

[stkeith]

Can anyone recommend a cover that will fit a B&W Companion hitch? Thanks.

 

[RV2600RB]

I had a Pullrite Superglide. Bought a cover from them. Might work for you?
Rich

 

[Dr Dolittle]

Following - please come back and post here if you find something.

 

[Jomani]

Personally, I found it difficult to find a cover that fit the way I thought is should. Below is a link to the cover that I have on the hitch right now (sitting under the trailer). Because I have the B&W Copanion with Ram puck system, the base is much larger than both Ford and Chevy. I don’t leave my hitch in the truck when we are not using it, so the cover is mainly for storage. Not exactly sure I would recommend this cover, but it was relatively inexpensive and does stay in place going down the highway.

https://www.amazon.com/dp/B0DCPB1QP3?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_0

 

[triplethreat]

I had one custom made (sized) from a company called "Covers & All" They are an online company and I had it made in early 2019 right after I bought my Companion 25K and the Momentum Toy Hauler. If I recall (I can't find paperwork for it), it was in the "grill/smoker" section and you have an option to customize the size, which I did after taking measurements for my hitch. I also had them add Plastic buckles/straps at all four of the corners instead of just relying on the elastic stretch corners while travelling and not using the trailer. All told it was somewhere in the $65 to $70 dollar range with shipping and it probably goes without saying there have likely been price increases since then.
They also had three choices of material and I chose the heaviest duty one that they offered. Here's a couple of pics...

 

[Scott'n'Wendy]

Ram puck system, the base is much larger than both Ford and Chevy. I don’t leave my hitch in the truck when we are not using it, so the cover is mainly for storage.

They are a joy to remove and install aren't they? Not exactly a lightweight. I use a chainfall in my garage to lift it.
When I bought my truck they said you cannot order a Ram Box with the 5th wheel prep. Looks like you managed to get it done.

 

[Jomani]

They are a joy to remove and install aren't they? Not exactly a lightweight. I use a chainfall in my garage to lift it.
When I bought my truck they said you cannot order a Ram Box with the 5th wheel prep. Looks like you managed to get it done.

I do the same - chain fall from the garage rafters. It is true that you can’t order the 5th wheel puck system with Ram Boxes. I just ordered the kit and installed myself. Of course, that means I have to use a Sidewinder pin box on the trailer.

Just traded the Ram last week for a Chevy. My new Reese Goosebox should be here tomorrow so getting rid of that heavy B&W and going gooseneck.

 

[stkeith]

Personally, I found it difficult to find a cover that fit the way I thought is should. Below is a link to the cover that I have on the hitch right now (sitting under the trailer). Because I have the B&W Copanion with Ram puck system, the base is much larger than both Ford and Chevy. I don’t leave my hitch in the truck when we are not using it, so the cover is mainly for storage. Not exactly sure I would recommend this cover, but it was relatively inexpensive and does stay in place going down the highway.

https://www.amazon.com/dp/B0DCPB1QP3?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_0

Thanks, I saw this one online. Was wondering how well it stayed on at highway speed.

 

[nprario]

I use the Classic Industries part # 80-116-010401-00 on my Chevy puck mounted unit. covers the entire hitch and base. Fits tight and stays that way even at highway speed.

 

[stkeith]

I use the Classic Industries part # 80-116-010401-00 on my Chevy puck mounted unit. covers the entire hitch and base. Fits tight and stays that way even at highway speed.

Thanks. I'll check this out. Looks like it might work for me.