Apr 26, 2021 #1 AT atinius New Member Joined Apr 26, 2021 Posts 1 What's the trick to getting the wires out of the push connects on an airxcel digital thermostat without breaking them?
What's the trick to getting the wires out of the push connects on an airxcel digital thermostat without breaking them?
Apr 26, 2021 #2 triplethreat Previously xrated Site Team Site Sponsor RV LIFE Pro Joined Oct 24, 2016 Posts 8,029 Location "Murvul", TN If I'm not mistaken, those wire are in the terminals with a spring loaded clip and the little tab on each terminal must be released, then the wire will come right out. You probably will need a very small screwdriver....think jeweler's type small.
If I'm not mistaken, those wire are in the terminals with a spring loaded clip and the little tab on each terminal must be released, then the wire will come right out. You probably will need a very small screwdriver....think jeweler's type small.
Apr 26, 2021 #3 ItchinToGo! Advanced Member Joined Jun 4, 2017 Posts 55 Check this out. https://www.youtube.com/watch?v=1UT2DZ1eacM
Apr 26, 2021 #4 BO BobLandry Senior Member Joined Jan 8, 2011 Posts 2,495 There is a special tool made to remove these. An electronics parts house would have one.