Hydraulic leveling jacks

RVL458353

New Member
RV LIFE Pro
Joined
Oct 17, 2015
Messages
2
I have a 310GK-R and was wondering if my hydraulic jacks feet, when fully retracted should be all at the same height. The two in front are higher than the others.
Thank you for any help with this.
 
I need to measure on level ground, but I’d swear my rear and mids sit a little lower than the fronts fully retracted.
 
I have a 310GK-R and was wondering if my hydraulic jacks feet, when fully retracted should be all at the same height. The two in front are higher than the others.
Thank you for any help with this.
The two front jacks are connected together independant of the other four so yes, they certainly could be at a different height.
 
They tuck under more on my 310 as well. I always assumed that this was because on a hump or dip the fronts were in more danger of hitting the ground.
 
Here's a picture of ours. Our fronts are snug up, mids down maybe and inch and rears two inches (plus on the upper frame.

west yellowstone.jpg
 

New posts

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom