Inverter not detecting grid power

[evahamm]

I have a WF-5220 pure sine wave inverter and it is no longer detecting grid power. The status light is green and the inverter is working otherwise but my control panel says I have 0 grid input even though I am connected to 50 amp shore power. I did notice that the terminals where the AC cables go into the inverter sparked before I loss grid power detection. Anybody have any idea as to what is going on? Is there a way to reset the inverter? Is there certain fuses somewhere that I can check? Or is my inverter completely screwed? I am new to camper living. I have a 2024 Influence if that makes any difference. Thanks in advance!

 

[Soundsailor]

I have a WF-5220 pure sine wave inverter and it is no longer detecting grid power. The status light is green and the inverter is working otherwise but my control panel says I have 0 grid input even though I am connected to 50 amp shore power. I did notice that the terminals where the AC cables go into the inverter sparked before I loss grid power detection. Anybody have any idea as to what is going on? Is there a way to reset the inverter? Is there certain fuses somewhere that I can check? Or is my inverter completely screwed? I am new to camper living. I have a 2024 Influence if that makes any difference. Thanks in advance!

It looks like that inverter has a fuse as well as circuit protection. You might want to check those. Also carefully inspect the inverter and surrounds to find the source of that "spark."