Leveling Control Panel Fuse

[DebLindgren]

Grand Design Fail
Sooo, we could not not get the Leveling Control Panel on the 5th wheel to work yesterday morning to leave. I googled and found that other owners had issues with theirs and the solution was to replace a 10 amp inline fuse.

We couldn’t find the location of the fuse yesterday and called Grand Design Service. The diagnostic guy, Daniel, had us check the power going in and out to see if the panel had power. They did. He said there wasn’t an online fuse. It was the Leveling Power Panel.

So I ordered one from Amazon to be delivered on Friday. It came a day early. We plugged it in and it did not work. My husband was going through it all and found the 10 amp fuse location. He replaced it and voila, it worked! Actually the old one works now too! Glad and . So appreciate your posts. If we had not known about the fuse, I don’t know what we would’ve done! Thank you.

 

[downsc123]

Glad you got it figured out - where physically was the fuse located?

 

[Steven@147]

@DebLindgren
What model RV? Which leveling system electric or hydraulic?

 

[terryriddle]

It would be nice to provide a photo of the inline fuse location. That could be helpful to others who might have this type of problem. I'm surprised that even Gand Design was unaware of such a fuse.

 

[DebLindgren]

Glad you got it figured out - where physically was the fuse located?

Bottom left corner. Where the wires met, behind sheathing and in it. My husband found it by running his hands along the wire. I will get a photo later. We’ve been dealing with leaving from Michigan to Kansas then Fl.

 

[DebLindgren]

It would be nice to provide a photo of the inline fuse location. That could be helpful to others who might have this type of problem. I'm surprised that even Gand Design was unaware of such a fuse.

I will. We’ve been focused on travel. Just imagine our surprise.

 

[DebLindgren]

@DebLindgren
What model RV? Which leveling system electric or hydraulic?

Solitude 282 WB 2021, hydraulic

 

[Suzyptx]

Grand Design Fail
Sooo, we could not not get the Leveling Control Panel on the 5th wheel to work yesterday morning to leave. I googled and found that other owners had issues with theirs and the solution was to replace a 10 amp inline fuse.

We couldn’t find the location of the fuse yesterday and called Grand Design Service. The diagnostic guy, Daniel, had us check the power going in and out to see if the panel had power. They did. He said there wasn’t an online fuse. It was the Leveling Power Panel.

So I ordered one from Amazon to be delivered on Friday. It came a day early. We plugged it in and it did not work. My husband was going through it all and found the 10 amp fuse location. He replaced it and voila, it worked! Actually the old one works now too! Glad and . So appreciate your posts. If we had not known about the fuse, I don’t know what we would’ve done! Thank you.

Wow