Lighting Modifications in Momentum 395M

[The Campoholics]

Hello all, we have a 2020 395M and unfortunately the ceiling lights switch turns on every light in the ceiling and we would love to be able to control the 4 light in the dining/loveseat slide independently, it’s so bright when you have all that lights on even though we can dim them, Has anyone made any modifications to theirs that they would be willing to share??

 

[A.Texas.Yankee]

You can do this, but it would require rewiring all the lights in question and installing separate switches. Fairly simple to do, except for access to wires being the limiting issue.

Sent from my SM-N986U using Tapatalk

 

[The Campoholics]

Thanks you!

 

[Sdbeasley]

We had the same problem in our 22MLE. We didn't like all the lights being on at the same time and we also dry camp and want to conserve as much battery power as possible. We switched out half the dome ceiling lights for ones that have an on/off button. I will attach a picture. The ones we bought were ones that are used on some Jayco trailers.(Jayco Light, Ceiling LED 4inch, 2006429). We did the 2 lights over the bed and a couple in the kitchen area. Doing it this way was really simple...just remove the old lights and connect the new ones in. Note: I did have to screw the dome lights into the cieling instead of the original spring holder style. Just the 2 wires per light. While the old dome lights were a little nicer looking it is pretty minor.