Lippert Patio Deck Rail Kit Gate Coupler Thumb Screws

[JRKy24]

We recently purchased a GD Momentum G-Class TT which came with the Lippert Patio Railing Kit (part https://www.granddesignrv.com/owner-support/parts/detail/67951).

The problem is we are missing the thumb screws to lock/align the patio gate couplers. The dealer stated that the patio system didn’t include them when we did the walk thru.

The below adjustment manual from lippert has a really good depiction of the thumb screws under figure 5A and 6A.
https://lci-support-doc.s3.amazonaws.com/technical-information-sheets/doors/ccd-0003845.pdf

Even the 21G manual references the same thumb screws on page 167 step 7. https://www.granddesignrv.com/sites...s/Momentum_G-Class_TT_2021_OM_Rev.01.2021.pdf

Anyone else with this patio rail kit have any suggestions on where to obtain these elusive thumb screws? If I can get the gate coupler off to take to a hardware store for thread sizing I will but that might take a little longer than I hoped.

Thank you for the help.

 

[No-ladder]

I just checked the knobs included with my 21g 1/4-20 1-1/2 thread length. I have not actually verified that these knobs fit the patio gate but I did verify them on a 1/4 20 nut. They should be easy to find

Lee

 

[Tommyp228]

Should have been included, they were in a drawer in the kitchen in our 21G.

 

[JRKy24]

Thanks for the measurements. I’m we have been through all the drawers but will look again. Thanks again for the info.