Lippert Through The Frame Slide Adjustment Videos

Steven@147

T&S RV Adventures
Site Sponsor
RV LIFE Pro
Joined
May 11, 2017
Messages
2,897
Location
Texas Domicile
Ran across a couple Lippert videos detailing the various adjustment points and procedures for "Through The Frame" slides.

And a video describing the manual crank method of "Through The Frame" slides. You get a good shot of the motor and pin that ties the motor output shaft to the gear shaft.

Also wanted to see how the new forum acts with videos.;)
 
Last edited:
On the manual override for "Through The Frame" slides, on our GD units the hex nut is welded to the motor shaft and you can get to it on the outside of the frame. You do not have to get iinside the coroplast bottom covering to access the hex nut as it says in the video.

On some GDs you can use the supplied crank handle, through a hole in the side skirting to get on the hex nut, just like the crank for the spare tire. On some GDs, like our 3350RL, there is no hole in the side skirting for the crank handle. You got to use a ratchet and socket on the hex nut right up next to the outside frame "on the opposite side" of the RV of the slide you want to move manually.
 
Last edited:
Pic of our through the frame slide manual override hex nut
IMG_1933.JPG



and a pic of our spare tire winch with added safety pin.
IMG_4297.JPG
 

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom