Multiple 12-volt devices in the truck?

Ziptrekker

Member
Joined
Feb 13, 2021
Messages
20
We have three 12 volt devices that we'll be using in the truck while we're pulling our travel trailer. We have one lighter socket. I'll want to make them not permanently wired. Any advice on how to do that?
 
We have three 12 volt devices that we'll be using in the truck while we're pulling our travel trailer. We have one lighter socket. I'll want to make them not permanently wired. Any advice on how to do that?

Kind of like Robs...
We use it for rear camera plug, TST tire monitor plug, and we boost antenna amp
 
Do any of the devices have a USB plug you can use? My TPMS has a 12V power plug but is really 5V USB.
 
Do any of the devices have a USB plug you can use? My TPMS has a 12V power plug but is really 5V USB.

In our case, the TPMS is USB, so it gets plugged into the USB port on the 12VDC center I linked above. The rear view camera is not USB. The charge connector for our RV GPS is built into the mount and the traffic module is on the power cable, so it has to plug into the outlet with the OEM cable.

Rob
 

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom