I have been fighting my Norcold 2118 to cool like I needed/wanted it to since 2018 when we purchased our Solitude 377. I thought I had pretty much tried everything to include tear it out and reinstall per the manual specs with clearance, insulation, baffles ect. Two years ago I added the Beech Lane dual thermostatic fans into the upper vent and it worked pretty well until last fall. While boondocking in Moab I could not get it to cool below 40 degrees on gas or electric no matter what I did. Fast forward to last week as I was getting it ready to head to Arizona for Spring break with my girls.
I added some fans to the fins inside the fridge. This is the Beech Lane kit that I hard wired into the fridge 12v. I have also had issues with the thermostatic switch with the three fans on the back of the fridge. I decided to bypass that and add a programmable thermostat for the fans. I used a simple 12v off Amazon
Click For Full-Size Image.
I added pigtails so I could hook it directly into the factory fan wiring harness. I set it to come on at 95 degrees and off at 80 degrees. Temp probe is same place as factory temp probe on fridge.
Click For Full-Size Image.
I have never had the fridge work so well. Granted it was only 85 degrees where we were at but I only ran the fridge on setting 4. These are my temps inside the fridge and freezer as well as history for the week with highs and lows.
Click For Full-Size Image.