Pass through storage floor

[ExBusDriver]

I’m thinking of installing the MORryde shore power cord reel in my forward pass through storage area, I wanted to know what that floor is made of. The instructions say it is held in place by four wood screws, I’m not sure that floor is wood… I like to make sure it is secure enough to stay in place while winding up the heavy 50amp cable.

My unit is a 2023, 303RLS.

Thanks,

John G

 

[Sleeping Rainbows]

I'm pretty sure the floor in mine is OSB.
I think I'd make some brackets and through bolt the cord reel to the crossmembers above.

 

[Second Chance]

I’m thinking of installing the MORryde shore power cord reel in my forward pass through storage area, I wanted to know what that floor is made of. The instructions say it is held in place by four wood screws, I’m not sure that floor is wood… I like to make sure it is secure enough to stay in place while winding up the heavy 50amp cable.

My unit is a 2023, 303RLS.

Thanks,

John G

Thread moved to Mods and DIY.

You can create a signature block with your RV and tow vehicle information (see mine below). That way you won't have to repeat that information whenever you post or ask a question - and others won't have to ask. You can create a signature by going to:

Forum Actions (on menu bar) -> Edit Profile -> Edit Signature (under My Settings on the left)

Note: you'll need to have a paid subscription to add an image to your signature.

Rob