CManley
Senior Member
We picked up our 303 RLS this Saturday. All looks good but for a few minor details. It towed well albeit much heavier than the last trailer and had no problems backing it along the side of the house. Very well put together which was one of the primary reason for selecting GD.
The off gassing is very strong, I suspect it will subside over the next few days of leaving it open. Opened all windows and ran two fans followed by cleaning the floor which seemed to be the primary source (as it turns out was filthy, so much for PDI), better this evening. How long did for others?
I had one item during the walk through which was that the refrigerator fan sounded like it had a piece of paper in it (picture a card in a spoke), the tech said its normal to hear the fan and he wasn't concerned with the paper noise. This evening I used my IPhone to view down the top of the refrigerator vent and could see an 8 1/2 x 11 piece of paper taped on the outside wall next to the fan. The paper was blocking upward airflow and hitting the fan. After a few minutes with a coat hanger while continuing to use the Iphone to see down the wall I was able to pull the paper up and out. It turns out to be the build sheet that would have been taped to the wall by GD behind the refrigerator.
Hoping to take it out this weekend and enjoy the 80 degree weather, all dependent on the off gassing issue subsiding.
The off gassing is very strong, I suspect it will subside over the next few days of leaving it open. Opened all windows and ran two fans followed by cleaning the floor which seemed to be the primary source (as it turns out was filthy, so much for PDI), better this evening. How long did for others?
I had one item during the walk through which was that the refrigerator fan sounded like it had a piece of paper in it (picture a card in a spoke), the tech said its normal to hear the fan and he wasn't concerned with the paper noise. This evening I used my IPhone to view down the top of the refrigerator vent and could see an 8 1/2 x 11 piece of paper taped on the outside wall next to the fan. The paper was blocking upward airflow and hitting the fan. After a few minutes with a coat hanger while continuing to use the Iphone to see down the wall I was able to pull the paper up and out. It turns out to be the build sheet that would have been taped to the wall by GD behind the refrigerator.
Hoping to take it out this weekend and enjoy the 80 degree weather, all dependent on the off gassing issue subsiding.