Propane & furnace & fireplace for heat

[Dan the man]

Jim, I deliver propane seasonally here in PA and like Klenger just said you can contact the local supplier in your area and they will sit a 100 gallon tank at your camper and give you a better price, at least they do here in PA.

 

[orbiker]

Ditto.... Just disconnect it pull it out of the trailer. I refill one of the two when it is empty. That way I always have a full tank in reserve. While the rigs have a changeover valve so that they can switchover automatically from the empty tank to the full tank, the danger in that is that if you are not paying attention, at 3am on a cold night you'll find you have no propane. I keep the valve closed on one tank until the one in use is empty, then manually switch to the full tank and pull the empty to be refilled.

When you get ready to buy gadgets, you can consider the Mopeka tank sensors. Google it and that'll give you some "boy toys" to put on your Birthday or Christmas wish list.[emoji6] I love mine!


Alan

I second Alan's idea. The Mopeka tank sensors makeit very easy to know with your bluetooth phone how much is in each tank.

 

[JCZhome]

There's all different kinds of propane tank gauges...you never have to run out because you didn't know. https://www.amazon.com/s/?ie=UTF8&k...hvtargid=kwd-132151481&ref=pd_sl_47n79rqots_b

 

[jim1521]

How do you calibrate those gauges? IOW, how does the gauge know if it's a 20 lb tank vs a 30 lb tank, and thus know whether it's half-full or 1/4 full?

 

[bertschb]

I'm as geeky as the next guy but with the auto-switching valve on our 5th wheel, I don't see any reason to get a tank sensor. When one tank is empty, it automatically switches to the next tank and displays a red "flag" to let you know the original tank is empty. You then disconnect the empty tank, get it filled and rinse and repeat. IOW, I don't care how much propane is in the tank being used because I always have a second tank that's full. The Mopeka system is very cool though! I almost bought one before I started using the auto-switch valve and figured out how it worked.

 

[arhayes]

I'm as geeky as the next guy but with the auto-switching valve on our 5th wheel, I don't see any reason to get a tank sensor. When one tank is empty, it automatically switches to the next tank and displays a red "flag" to let you know the original tank is empty. You then disconnect the empty tank, get it filled and rinse and repeat. IOW, I don't care how much propane is in the tank being used because I always have a second tank that's full. The Mopeka system is very cool though! I almost bought one before I started using the auto-switch valve and figured out how it worked.

All true, but it is nice to be inside and see that a tank is nearly empty.

For the poster that asked how Mopeka works, it uses a sonar type technology. When you install it on the bottom of a full tank, it then gauges usage from that Full point. It will supposedly read any tank, including 100lb MH tanks. I've found it to be spot on with my 30lb tanks.


Alan

 

[D2Reid]

I wonder if it would work on my black water tank?

 

[arhayes]

I wonder if it would work on my black water tank?

LOL! I think they make higher dollar sensors that work - mine have not been reliable since day 1. I just know to dump once a week.[emoji12]


Alan

 

[RamGunner]

I have 6 30# cylinders that we run in a rotation. When one is empty it goes into the truck, and once a week I go get them filled (this way I can go an entire week on one trip to fill up). Most trips in the cold of winter I have 3 or 4, and have had to do 5 a couple of times in the coldest temps (-6 to -1 at night, single digits daytime).

Pilot/Flying J offers a $0.10/gallon discount if you use their RV Plus card (generally comes out somewhere around $2.55 to $2.85/gallon). If you are in the Salt Lake area, State Trailer Supply on Redwood Road sells for $2.19/gallon. I use them when in the area. I had a couple of times when I went in and no one was on-site that was certified to fill tanks, or their system was out of order. There is a PFJ on 2100 South a couple of miles away from them.

 

[RamGunner]

I'm as geeky as the next guy but with the auto-switching valve on our 5th wheel, I don't see any reason to get a tank sensor. When one tank is empty, it automatically switches to the next tank and displays a red "flag" to let you know the original tank is empty. You then disconnect the empty tank, get it filled and rinse and repeat. IOW, I don't care how much propane is in the tank being used because I always have a second tank that's full.

I totally agree. One of my tasks in the morning before working and in the afternoon after working is to check the indicator and swap out the empty tank if necessary. I only do it that often when we start using the furnace, otherwise I check it once a week in the summer. With cooking/baking we may use one tank in 2.5 to 3 months without the furnace.

 

[wflorence25]

hello i recenlty bought a 2016 grand desig monuemtum 385th wth with the thermostat i think we have 2 zones but how do i control the two zones for heat? seems it comes out of ac. also there is a litlle panel next to it if im using my onboard generator should that say 50 amp or 30 amps, the generator seems to be bogging and i really have nothing on

 

[orbiker]

hello i recenlty bought a 2016 grand desig monuemtum 385th wth with the thermostat i think we have 2 zones but how do i control the two zones for heat? seems it comes out of ac. also there is a litlle panel next to it if im using my onboard generator should that say 50 amp or 30 amps, the generator seems to be bogging and i really have nothing on

It's been a while.
Turn off auto if I remember correctly. KEN

 

[wflorence25]

Thanks I see turn it on smd dome turn it off

 

[orbiker]

Thanks I see turn it on smd dome turn it off

Try turning the fan to auto. KEN

 

[orbiker]

Try turning the fan to auto. KEN

The air should come from the floor vents. The air conditioning vents in the ceiling should stay off with heat engaged. KEN

 

[wflorence25]

Ok so auto off its very sophicated

 

[orbiker]

Ok so auto off its very sophicated

Did you set to heat and did it come on with only the floor vents?
KEN

 

[wflorence25]

I did I can only do one zone it's new to me no manual the ac are heat pumps to

 

[arhayes]

I did I can only do one zone it's new to me no manual the ac are heat pumps to

There is only one zone for heat, and it comes from your propane furnace which will supply heat through all the floor vents. The “zones” are solely for your rooftop AC units. Newer units have heat pumps as an option which does provide heat from the rooftop units, but on my 2015 that was not an option, and I’m guessing it was not in ‘16 either.