Question about water pump

DI

Ditkitty

Guest
We have water in our fresh water tank, valve is set correctly to use the tank, switch for water pump is turned on, but when we open a faucet, either hot or cold, we don't get water, and the pump doesn't even sound like it is coming on. Any suggestions?
 
Just to verify that it's a pump issue and not the Kantleak valve, set the valve to 'Winterize/Sanitize' (12 o'clock) and see if the pump runs. If the pump does run with the valve in that position, you can check the in-line fuse at the pump, though you'll have to remove a panel to access it behind the docking station. If the pump runs, try switching the Kantleak valve to other poisitons then the position for the pump (3 o'clock) and try again.

Dave

Edit: Does the red indicator light come on when you turn on the water pump?
 
Hmmmmm....pump does not run in any position. Took off the access panel, and while I had a quite attractive view of Dave's butt, he didn't see anything that looked like an in-line fuse. So I dug out the installation manual, and it looks like I should be seeing the inline fuse on the red lead, but nada.......
 
I checked mine as that area open at present...no in-line fuse at the water pump. I did find a 15A in-line fuse to the pump switch in the wiring behind the switch panel in the coach.

Dave
 
Inline fuse behind the switch panel was the culprit. Thanks for the tip!
 

New posts

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom