Receptacles don't work

[Sally Barnes]

Receptacles in 2024 grand design reflection 337rls don't work. How do I reset them.

 

[goducks14]

All of them? Is the micro on?

 

[CedarCreekWoody]

Check your power control center (electrical breakers) for a GFCI breaker. It may be tripped. Turn it fully off then back on.

 

[kb0zke]

If none of the outlets work, then I'd check the various circuit breakers. If only the GFI outlets don't work, I'd check the various GFI outlets to see if one has tripped.

One of the first things we did was turn off all of the outlet circuits except one and label every outlet that was on that circuit. Then we turned that circuit off and turned another on and did the same thing. Every outlet in the trailer now has a colored dot sticker on it that corresponds to the colored dot sticker on the circuit breaker.

 

[Second Chance]

Check your power control center (electrical breakers) for a GFCI breaker. It may be tripped. Turn it fully off then back on.

Unless things have changed, there in no GFCI outlet or breaker in the main distribution panel on the 337. It's typically in the bathroom (with one in the utility bay, as well).

Rob

 

[CedarCreekWoody]

Unless things have changed, there in no GFCI outlet or breaker in the main distribution panel on the 337. It's typically in the bathroom (with one in the utility bay, as well).

Rob

Things change Rob. Lol. In my 2024 Reflection the GFCI circuit is controlled by a GFCI circuit breaker, not the usual daisy chained GFCI outlet. I was surprised to see it too. I suspect the OP has the same setup.

 

[DragonDriver]

Receptacles in 2024 grand design reflection 337rls don't work. How do I reset them.

I'm assuming you checked the circuit breaker.
Start at the tombstone outlet under the table. It's the first in the line of wiring that goes around the y trailer. See if you can get power at the wires ... not the plug in part.
If no power then loosen enough of the belly fabric to find the little snap connector.

 

[CedarCreekWoody]

Sally, please give us an update on your issue. If it has been corrected please tell us how. This info is helpful to others with the same issue.

 

[sande005]

Ummm - Sally seems to be having a few issues (slide also).
Hate to be simplistic - but is the trailer plugged into shore power? Only a few things (lights mostly) work if not plugged in. Does the microwave work? (if so, yes it is getting power from outside and we can continue looking at things specific to the 120v side).

 

[CedarCreekWoody]

Ummm - Sally seems to be having a few issues (slide also).
Hate to be simplistic - but is the trailer plugged into shore power? Only a few things (lights mostly) work if not plugged in. Does the microwave work? (if so, yes it is getting power from outside and we can continue looking at things specific to the 120v side).

It's difficult to offer assistance when they don't respond back to our questions and recommendations.