Showers for taller people

[Cate&Rob]

The shower head on our Reflection 303RLS was a little low for both of us.
Rather than move the bracket up and leave two screw holes visible, we went looking for a matching bracket.
Found it ! Moen PN M1386 . . . about $5 at Lowe's.
ATTACH=CONFIG]1074[/ATTACH]

 

[Kamper]

Nice! Thanks for the tip. I am 6'5" and this would be nice.

 

[GD350M]

Moen PN M1386 . . . about $5 at Lowe's.

Cate & Rob,

I have searched all over the internet and I cannot seem to find this Part by Moen. As I am 6'4" This would come in handy for me. Could you maybe supply a link of the exact part for us?

 

[huntr70]

http://www.moen.ca/brushed-nickel-handshower-bracket/_/R-CA-CONSUMER:M1386

 

[Cate&Rob]

huntr70 . . . thanks for the find !

BTW, the height shown in the picture just barely keeps water from the original shower head from going over the enclosure.
A higher location or higher water pressure or a different shower head might easily clear the enclosure wall.
Some experimenting required before placement .

Rob

 

[Brent M]

Nice, how secure is it? Did you hit a stud or paneling?

 

[Cate&Rob]

I don't think I hit a wall stud with the screws, but the added bracket is just as solid as the original.
Probably just through the plastic shower wall and into the wall panel behind.
The shower head that it is holding, doesn't weigh much.

Rob