BogeyBoyNevada
Senior Member
Greetings
Just had this issue come up and I am not sure what to do. I noticed that when the single slide on or Imagine 2500RL is fully extended, the side bracket at the top is pulled out about a half of an inch. This is the bracket next to the actual slide room. In pulling out, about four screws have popped out from the top of the frame. I unscrewed one of the existing screws, and they are very short, less that one half inch long. I tried a couple of slightly longer screws to try to secure the bracket, but could not find any way for the screws to attach to anything. I hope this makes sense and was wondering if any other GDers have encountered this, and what needs to be done to secure this bracket
Thanks
Just had this issue come up and I am not sure what to do. I noticed that when the single slide on or Imagine 2500RL is fully extended, the side bracket at the top is pulled out about a half of an inch. This is the bracket next to the actual slide room. In pulling out, about four screws have popped out from the top of the frame. I unscrewed one of the existing screws, and they are very short, less that one half inch long. I tried a couple of slightly longer screws to try to secure the bracket, but could not find any way for the screws to attach to anything. I hope this makes sense and was wondering if any other GDers have encountered this, and what needs to be done to secure this bracket
Thanks
