Slide out seal torn and not accessible for replacement.

[Vito_760]

I've replaced slide seals before on the outside of my Reflection. How do I replace the slide seal on my Reflection 120MKS on the inside of the kitchen slide? It is torn but it is inaccessible. There is a corner wall in way. Even if I remove the refrigerator, I am not able to get at the seal except for the top 6 inches. It almost appears that the entire slide needs to be removed to get at it?? Or do I try to remove all of the trim so that I get at least 4 inches to work with?

 

[jkwilson]

I’m pretty sure that can be done from the outside. I assume you are talking about the wiper.

Factory, it may have been a one piece seal, which requires slide removal. But you can replace it with a two piece seal which can be done with the slide in place. Wiper may be AP Products 018-316 Black and D may be AP Products 018-312-EKD Black. Those are the parts for my 303, but do your own research to be sure.

I believe there is a tutorial on here somewhere, but I’m not having any luck tracking it down.