slide position when out

[Kevin & Kelly]

We just brought our brand new 325X home today. After having to have a tech come out to the house to get our auto level environment corrected we had not noticed the street side slide out doesn't open all of the way at the rear. The front opens out and touches the wall but the rear has about a 2" gap at the bottom and about 1/2" gap at the top. Anyone know how to fix this. We are new to slides.

 

[Dave and Monica]

They are adjustable to get them proper at all 4 corners both extended and retracted. The one corner that's 2" out seems excessive...it might be best left to the dealer to correct and ensure that's the only issue. Just make sure that it's completely to your satisfaction instead of 'good enough'...it's one of those adjustments that takes patience and time to get it right.

Dave

 

[Kevin & Kelly]

The dealer recommended running the slides back in and out again this morning while humidity was down. They thought maybe traveling caused it to stick. Tried that a while ago and still no different. It is out maybe 1-1/2" at bottom and 1/2" at top. It seems like it is just not seating in place like the door side. How can I make adjustments to the slides? I will probably have dealer look into this but if I can make small adjust men's later I may. I feel the dealer rushed us out since they had so many deliveries yesterday.

 

[Jannnan]

I can not say this strong enough, get the dealer to adjust those slides! I had to almost fight with the dealer to get mine adjusted. I had to get the factory involved, do that if you need to.