Slide Topper - 2250RK

Heavysledz

Senior Member
Joined
Feb 18, 2021
Messages
291
Location
Star, ID
I am looking into getting a slide topper for my 2250RK and I noticed the upper fridge vent is really close to the upper right corner of the slide box. Just eyeballing it, it looks awfully close and might not have enough space to mount the awning guide arm....has anyone installed a slide topper on their 2250RK? If so, what make/model if you wouldn't mind sharing...

IMG_4789.jpgATTACH=CONFIG]33174[/ATTACH]
 

Attachments

  • IMG_4790.jpg
    IMG_4790.jpg
    76.1 KB · Views: 24
I am looking into getting a slide topper for my 2250RK and I noticed the upper fridge vent is really close to the upper right corner of the slide box. Just eyeballing it, it looks awfully close and might not have enough space to mount the awning guide arm....has anyone installed a slide topper on their 2250RK? If so, what make/model if you wouldn't mind sharing...

View attachment 33175ATTACH=CONFIG]33174[/ATTACH]

I have a similar configuration on my 2970RL and have a topper. Mine were dealer installed.

They have different type brackets. On the fridge side they used a standard bracket and on the door side. They used a low profile bracket.

I have included a pic that shows it but not very well. I'll have the trailer home this week and can take a better picture. My toppers are Lippert brand.
IMG_20200907_144532970_HDR~2.jpg
 
I have a similar configuration on my 2970RL and have a topper. Mine were dealer installed.

They have different type brackets. On the fridge side they used a standard bracket and on the door side. They used a low profile bracket.

I have included a pic that shows it but not very well. I'll have the trailer home this week and can take a better picture. My toppers are Lippert brand.
View attachment 33176
excellent, thank you...
 
GD uses Carefree Alpine Toppers and their short or tall bracket mount will fit that clearance. Other styles brands could vary, but do know you can mount on the lower portion of the slide trim as well. As long as you're in below the roof line of the slide box.
 
Whatever topper you choose, mount part that attaches to wall of camper as high on wall as possible to allow rain to flow off fast. Saw toppers mounted on some sides where part that attaches to camper was almost level with slide and water would pool at top of slide during heavy rain. Have 2250RK and mine connects to camper up against gutter or as high as you can mount it.
 
Last edited:
I am looking into getting a slide topper for my 2250RK and I noticed the upper fridge vent is really close to the upper right corner of the slide box. Just eyeballing it, it looks awfully close and might not have enough space to mount the awning guide arm....has anyone installed a slide topper on their 2250RK? If so, what make/model if you wouldn't mind sharing...

Here are the pictures from my slide topper on our 2970RL street side with the fridge in the slide. You can see there is a smallish bracket that is mounted to the wall and then the larger bracket slides into that. There is plenty of room/clearance with the fridge vent cover frame. Hope this helps. I was going to install mine but my DW stepped in and said "no the dealer will install them". Glad for that because the door side slide topper with the two awnings I am sure I would have screwed it up.

CurbSideSlideTopperBracket.jpg

Here is picture of the bracket used on the door side topper. On the 2970RL there is an awning on the slide and an awning over the door. All three are pretty close when all are closed.

Imagine2970RL DoorSide SlideTopperBracket (2).jpg
 
Thanks Mike,

This makes more sense now and shows that they have taken this into account.....however, looking at your pics, I see a few things that would concern me if it were my trailer.

1. The mounting plate above the fridge should have 2 set screws in the lower holes to keep the plate from wanting to slide one direction or the other. It looks like in the pictures, that they are missing.
2. On the other end above the awing arm, it looks like one of the self-tapping screws holding the rod into the bracket has snapped off. Although this will not affect performance, it will be a PITA if you ever have to remove the topper as you will have to get that drilled out.
3. Maybe it's an illusion from the pics, but it looks like the right side is mounted higher than the left side.

Not trying to be negative especially since you are helping me out, but not sure if you were aware of these items or not.
 
I am looking into getting a slide topper for my 2250RK and I noticed the upper fridge vent is really close to the upper right corner of the slide box. Just eyeballing it, it looks awfully close and might not have enough space to mount the awning guide arm....has anyone installed a slide topper on their 2250RK? If so, what make/model if you wouldn't mind sharing...

View attachment 33175ATTACH=CONFIG]33174[/ATTACH]


I installed a Solera topper on my 2500RL. I had the same concern so sent a question to eTrailer about the bracket size. They responded and put a technical link on their site:

https://www.etrailer.com/question-379540.html?fb=yes

Bought the Solera and installed it myself. Pretty easy with 2 people.
 

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom