Table conversion to bed 2800 BH

[SueWeis]

We cannot get our table top to sit level between the benches so we can convert it into a bed. Any suggestions?!

 

[phillier]

I adjusted the feet on the window side almost all the way out to make is as level as it can get.

 

[Gstepp22]

Tell your guests not to sleep close to the edge or they might slide off?

I dunno. Wish I could help. Mine sits level. It shouldn't be the legs as they are folded up when converted to a bed. Either the top is warped or you got some uneven benches. Do you have a long level or straight edge? That sholud tell you what's wrong.

Sent from my Nexus 6 using Tapatalk

 

[SueWeis]

Will live with it!

Tell your guests not to sleep close to the edge or they might slide off?

I dunno. Wish I could help. Mine sits level. It shouldn't be the legs as they are folded up when converted to a bed. Either the top is warped or you got some uneven benches. Do you have a long level or straight edge? That sholud tell you what's wrong.

Sent from my Nexus 6 using Tapatalk

Thanks for the feedback. The base (bottom of the table) sits level on the benches but there is not a edge (specific notch) to keep it from shifting off the benches. We owned a Jayco before and the table sat in a specific notch/ledge to keep the table in place. Additionally, our current table top is so bulky it rises above the benches so it is uneven.

It is manageable but to your point we are concerned about one side of the table slipping off the bench which it did once when our son was on it.

 

[SueWeis]

Thanks for the replay! Ours collapses to make it a shorter table which sits on the benches. Unfortunately I can't adjust the feet of our table (at least that I am aware of). My husband is an engineer and he too is frustrated by the design. We have a trif-old sofa so hopefully we won't have more than one set of guests to have to convert the table.

 

[SueWeis]

Thanks for the reply! Ours collapses to make it a shorter table which sits on the benches. Unfortunately I can't adjust the feet of our table (at least that I am aware of). My husband is an engineer and he too is frustrated by the design. We have a tri-fold sofa so hopefully we won't have more than one set of guests to have to convert the table.