tongue jack jammed in the retracted position

Thread Summary

Summarized on:
Original Member Title: tongue jack jammed in the retracted position
This AI-generated summary may contain inaccuracies. Please refer to the full thread for complete details.
An RVer reported that the tongue jack made a noise after being retracted too far, then would move only slightly in either direction and would not extend. Members suggested trying the manual override, but the RVer reported that using a ratchet broke a shear bolt and left the jack jammed. Another member suggested a Husky replacement with travel-limit switches.

The RVer later clarified that the original Lippert jack had previously been bent after the truck’s tailgate accidentally activated the...
More...

acdodd

Senior Member
Joined
Feb 24, 2024
Posts
121
Location
Washington State
I retracted the tongue jack. I didn't stop soon enough and it made a noise.
After arriving at our new site the tongue jack will not extend.
It will move a little in both directions but it stops. I took the cover off and nothing seems broken.
Fortunately it is jammed in the retracted position so I can still travel.
Any help will be most appreciated.
 
Yep, get a 3/4 inch socket on the nut on top and try to get it to move. Sometimes when run too far, it needs a little assistance.
 
Sorry, I don’t have a solution, suggest replacing it with a Husky which has switches to stop travel at the extremes. Also recirculating ball travel nut so it moves smoothly, even in freezing weather. Good luck.
 
I tried moving it with a 1/4" ratchet and broke the shear bolt.
It jammed up hard.
Looks like our trip is going to be cut short..
Im going to order a new jack. I'll replace it when we get home.
Thanks for the help guys.
 
I am not sure what shear bolt you are referring to, but here is a video from Lippert on how to lower and raise the jack manually. That's provided you have a Lippert since you never said what kind it is.

 
I am not sure what shear bolt you are referring to, but here is a video from Lippert on how to lower and raise the jack manually. That's provided you have a Lippert since you never said what kind it is.

Sorry for not telling you I had to replace the original lippert jack.
I destroyed the original one in Oklahoma. I raised the jack then I had to open my F150 tailgate. The tail gate hit the up switch and lowered the jack back down and I didn't realize that happened.
So when I drove off the jack dug a ditch in the gravel and bent the jack. My hearing is so bad I didn't hear it dragging.
I went to HF and bought a new 5000 pound jack.
That was the only option in Redmond Oregon.
I'm all repaired and we're good to continue on our 56 anniversary trip.
Thanks to everyone who help.
 
Sorry for not telling you I had to replace the original lippert jack.
I destroyed the original one in Oklahoma. I raised the jack then I had to open my F150 tailgate. The tail gate hit the up switch and lowered the jack back down and I didn't realize that happened.
So when I drove off the jack dug a ditch in the gravel and bent the jack. My hearing is so bad I didn't hear it dragging.
I went to HF and bought a new 5000 pound jack.
That was the only option in Redmond Oregon.
I'm all repaired and we're good to continue on our 56 anniversary trip.
Thanks to everyone who help.
Glad your trip wasn't ruined. We had issues with new Ford F150 - tailgate would open for no reason while driving. Like your situation, bumping along the road slowly lowered the jack- unkown to us until the jack was scraping road and bent beyond repair. Ford never could solve problem and the endgate continually randomly opening towing or not😠- sold and bought a GMC Sierra. Problem solved!
 
Bought a new one with a smaller "head" that allowed end gate to clear and our Gmc end gate can open fully without unhitching. Works as well as the Lippert.
 
Bought a new one with a smaller "head" that allowed end gate to clear and our Gmc end gate can open fully without unhitching. Works as well as the Lippert.
Unfortunatly I didn't have a choice on the replacement.
The only place to buy a new jack was Harbor Freight.
I have tried to rotate the jack so I can open the tailgate but it still will not clear. Must be a Ford F150 deal.
 
We did find that adding a shell and always making sure it was locked, did keep the end gate in position even if it was really "open." Got rid of f150 for that reason and a couple other issues that concerned us.
 
When I use the electric jack, I hit the end and immediately reverse it a little bit to relieve pressure. I have never had it fail. I have an electric drill to operate the stabilizers. It can also be used with the jack and with an extension operate the slide.
 
Had the tailgate / jack issue on our travel trailer years ago. Went back to the dealer that I got the hitch from and traded even up for a longer shank.
 

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom