TPMS Booster install

[Rugged Lilac]

Just for general information. I installed my tireminder in my new 2660BS. I removed the tire linc mount so I could use the existing power wiring. Works great but be aware the wire is always hot. Used both the battery and solar disconnect and still hot so I will install a battery disconnect so I can turn it off at some point.

 

[jjbbrewer]

I installed my TST507 repeater on the back of the receiver hitch of my truck. It's powered by the trailer connector power, so it switches on when I connect the trailer and off otherwise.
(I was 100% certain I'd forget to turn it off if I didn't make it automatic)

The antenna hangs a little below the hitch so the sensors have an unobstructed path to the repeater.

 

[MtnGuy]

I installed my TST repeater on the top of the battery box on my Imagine 22 MLE. It works great there. Go figure, but the TST system worked great on my Reflection 337RLS 5th wheel without a repeater, but did not work well on my 10’ shorter bumper pull trailer without the repeater.

 

[trailrydr]

I placed my TST repeater behind the rear seat in my Ford crew cab. Mine too works great for all trailers I have including my 295RL