Victron CerboGX Solar Charge Meter

[Riverbug]

Don't know what else to call this, or to explain it easily but here goes. I love that I can see how much solar I'm getting from my Renogy panels, Victron MPPT controller, and Cerbo GX. I still also have the OEM Furrion solar panel and charge controller connected to the system. But the solar charge rate on the Cerbo doesn't reflect the Furrion system, obviously. Just curious if there is a way to combine the Furrion into the solar view of the Cerbo GX? Does that make sense? The two systems cannot be combined at the Victron charge controller and I can't think of any other way to do it. Just thought I'd ask.

Naturally, I can see the charge from Furrion coming through the shunt and that's fine too.

 

[Mark_303RLS]

I think you might have to replace the Furrion charge controller for another Victron MPPT charge controller. This would also give you the added benefit the two charge controller working in unison for Bulk, absorbtion and float modes once they were networked together in the Victron software.

 

[Riverbug]

I think you might have to replace the Furrion charge controller for another Victron MPPT charge controller. This would also give you the added benefit the two charge controller working in unison for Bulk, absorbtion and float modes once they were networked together in the Victron software.

That's what I figured. I see now that I could get a Victron 75/15 for $80. Might just do that. I wouldn't add another Furrion panel anyway so for $80 I would have more control over the existing Furrion charge profile, monitoring, etc. Will put that on my list. Thanks.