Vinyl flooring right slide

[RVLUKE]

I have a 2021 M395 MS-R, interior Vinyl flooring attached to the slide (same design as the flooring) that covers the seals and floor trim. This piece of vinyl once the slides have been retracted to the close position, make contact with the sink counter base causing the the vinyl to bow up and maintain this bow even after the slides are extended. Has anyone else experience this condition. If so is there a fix? I understand I can trip the excess vinyl off so there is no interference but I thought I would ask if there is another fix.

 

[huntindog]

I have a 2021 M395 MS-R, interior Vinyl flooring attached to the slide (same design as the flooring) that covers the seals and floor trim. This piece of vinyl once the slides have been retracted to the close position, make contact with the sink counter base causing the the vinyl to bow up and maintain this bow even after the slides are extended. Has anyone else experience this condition. If so is there a fix? I understand I can trip the excess vinyl off so there is no interference but I thought I would ask if there is another fix.

Mine does the same, but it does lay down. Running the heater softens it up, and it lays down pretty quick

 

[ktnissen]

Our 395 does the same with the flooring. We flip it up when bringing the slides in and it lays down nice after we open and let it sit for a few minutes.