Washer /dryer

[RSPhillips]

We discovered we had water under our Splendid washer in 391 Momentum. With further inspection we found the floor under the washer was broken. How would we repair this?

 

[SSROSS]

How old is your rig? If it is fairly new I would take it back to your dealer because I think the floor structure is probably welded aluminum framing and a little more difficult for the average person to repair. Also I would look into a pan that could go under your washer that you could drain to the outside of your rig in the event of another water leak. I know Lowe’s and Home Depot sell them and so do some plumbing supply outlets. They usually are required in upstairs laundry rooms and most apartments now days.

 

[LMagelitz]

We discovered we had water under our Splendid washer in 391 Momentum. With further inspection we found the floor under the washer was broken. How would we repair this?

Here is what I did when the wooden floor squeaks beneath the washer in our 310 got to be more than I could bear. I ripped out the particle board raised floor and went back with 3/4” plywood. Getting the dryer on its own shelf helps a lot with stability also.

 

[Keebler]

Here is what I did when the wooden floor squeaks beneath the washer in our 310 got to be more than I could bear. I ripped out the particle board raised floor and went back with 3/4” plywood. Getting the dryer on its own shelf helps a lot with stability also.

Fantastic job and photos. REALLY like the separate shelf for the dryer.