We are on road to Glacier and just noticed a puddle of water on floor seeping from under cabinet where circuit panel is located. Any ideas of what it could be?
Peggy
Don't worry about where the post is . . . Dave will move it once he sees this.
The plumbing is on the same level as the main floor in front of the circuit panel.
I expect that your trailer is tilted ever so slightly to the right side and the water is running across the floor under the cabinetry from the plumbing connection area on the left side.
To figure out what is going on, you need to remove the wall section at the back of the pass through storage area to see where the water is coming from. This is relatively easy to do . . . once you get the storage area emptied out . Three or four screws down each end of the wall section.
I am kind of surprised that the water is making it all the way across this floor without first falling through one of the many holes in this floor and ending up in the belly. You should probably also check the underbelly for excessive sagging from water.
The simplest possibility is that the filter on the water pump has popped loose (if you have been using tank water). The next most likely source is one of the connections on the back of the Kantleak selector valve. Both of these leaks are not uncommon on Reflections.
Thank you so much, Rob. We will check these things out when we get parked in GLACIER later today. We will let you know what we find out. Again, we appreciate your feedback!