What do you use to cover, or seal off, the bedroom floor register?

[MoonShadow_1911]

I've been searching online for a vent cover for the floor register in the bedroom. 99.9% of what I've found are magnetic covers, which in a stix-n-brix is fine since they usually are metal registers. In the coach, they are plastic registers with metal screws; not enough surface area for the magnets to hold.

It needs to be something that won't convey heat to the feet when it's stepped on. I thought about using Glad Press and Seal but in but sure that it would hold up for the winter.

 

[livinthelife]

I've been searching online for a vent cover for the floor register in the bedroom. 99.9% of what I've found are magnetic covers, which in a stix-n-brix is fine since they usually are metal registers. In the coach, they are plastic registers with metal screws; not enough surface area for the magnets to hold.

It needs to be something that won't convey heat to the feet when it's stepped on. I thought about using Glad Press and Seal but in but sure that it would hold up for the winter.

How about getting a dampered vent?

https://www.etrailer.com/RV-Vents-and-Fans/JR-Products/37202-28915.html

 

[MoonShadow_1911]

How about getting a dampered vent?

https://www.etrailer.com/RV-Vents-and-Fans/JR-Products/37202-28915.html

Perfect! Google failed me again! Thanks!

 

[FT4NOW]

I've been searching online for a vent cover for the floor register in the bedroom. 99.9% of what I've found are magnetic covers, which in a stix-n-brix is fine since they usually are metal registers. In the coach, they are plastic registers with metal screws; not enough surface area for the magnets to hold.

It needs to be something that won't convey heat to the feet when it's stepped on. I thought about using Glad Press and Seal but in but sure that it would hold up for the winter.

We had a floor register in our Reflection, I removed it and replaced it with a metal version from a big box hardware store, then I bought a small sheet of magnet and cut it to fit the register, worked out well. Benefit of this over the damper version is it keeps dirt out.

 

[Jims94vmx]

We use carpet stair tread.

 

[MoonShadow_1911]

We use carpet stair tread.

View attachment 48672

I've got a couple of extras... Never thought about that. Thanks!

 

[Second Chance]

Perfect! Google failed me again! Thanks!

That vent is steel (you were worried about heat conduction). Another work-around might be using Velcro to attach a piece of plexi or thin painted plywood.

Rob

 

[MoonShadow_1911]

That vent is steel (you were worried about heat conduction). Another work-around might be using Velcro to attach a piece of plexi or thin painted plywood.

Rob

That's another good suggestion! Thank you, Rob!

 

[IBEW Sparky]

I've been searching online for a vent cover for the floor register in the bedroom. 99.9% of what I've found are magnetic covers, which in a stix-n-brix is fine since they usually are metal registers. In the coach, they are plastic registers with metal screws; not enough surface area for the magnets to hold.

It needs to be something that won't convey heat to the feet when it's stepped on. I thought about using Glad Press and Seal but in but sure that it would hold up for the winter.

We use a small cotton bathroom throw rug.