Where Are These Loose RV Screws Coming From?

ron045

Senior Member
RV LIFE Pro
Joined
Dec 3, 2016
Posts
529
Location
Pennsylvania
Wrapping up season 4 (In this rig). We seem to find a screw or two on the floor after every trip.

Most times I can ID the screw and the missing place. The decorative window trim screwed to the wall. I think I have replaced nearly every screw twice.

But I can not figure out where these screws go. They look just like the screws on the window frame. But I've checked every window and none are missing.

All of the furniture appears to be secure as well.

Where else should I be looking? Is it possible these are dropped screws during the building phase and they roll out from the nooks and crannies every trip?

I have also found this longer silver screw and a nut with built in lock washer.
 

Attachments

  • IMG_20260830_131714245_HDR_PCT.jpg
    IMG_20260830_131714245_HDR_PCT.jpg
    81.3 KB · Views: 62
Last edited:
Just about answered my own question. Found a piece of trim behind the couch. Saw another screw on the floor to match the other 10. 11 screws in total. Guess how many holes? Yep 11.

Used a generous amount of wood glue and put them all back. Now just have to figure out the shinny silver screw and the nut.
 

Attachments

  • VID_20260830_135551669.mp4
    3.9 MB
  • IMG_20260830_140632093_HDR_PCT.jpg
    IMG_20260830_140632093_HDR_PCT.jpg
    287 KB · Views: 46
  • IMG_20260830_140648298_HDR_PCT.jpg
    IMG_20260830_140648298_HDR_PCT.jpg
    63.9 KB · Views: 49
I've found piles of various screws in enclosed spaces. I pulled our fireplace to fix the TV lift and found about 20. I found another pile when replacing the AC\DC converter, some more when I pulled the refrigerator to replace a fuse, and one of those L-shaped fixtures used to fasten the shades in the water heater area. Almost all are from the building phase.
 
Just about answered my own question. Found a piece of trim behind the couch. Saw another screw on the floor to match the other 10. 11 screws in total. Guess how many holes? Yep 11.

Used a generous amount of wood glue and put them all back. Now just have to figure out the shinny silver screw and the nut.
I've had those same screws come loose (maybe more than once). Finally put in longer ones and 1 size up. And I didn't crank on them with an electric tool as the factory does (you know- when they strip them out so they really don't hold). yep - some quality Amish working going on there (NOT!).
 

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom