Winterizing washing machine

Sandi

Senior Member
Site Sponsor
Joined
Dec 27, 2013
Messages
989
Location
Lexington, KY
Hey all!
We have the Splendide Artisan washer in our 369 RL. We have winterized the entire unit but not sure how to get antifreeze into the lines, pump and drain trap of the washer. We know we can pull the washer out but are trying to avoid that. It's a pain in the butt!!
Anyone have any brilliant ideas? Allen would really appreciate it!!!
 
The instructions are in the book that came with the machine and it's very easy, did mine about two weeks ago here is what it says
If your currently pumping antifreeze through your fresh water system, you can follow these steps to winterize your washing machine:

1) with machine power off advance Cycle Selector to position 3

2) press on/off button set water temp to warm then press start. Let machine fill till drum turns could take 1 to 2 minutes

3) press on/off button to power off

4) Advance Cycle Selector to "B"

5) Press on/off to then press start

6) After letting antifreeze drain completely from drum press the on/off button to off YOUR FINISHED
 
Thanks so much to both of you! We couldn't find our manuals. I'm sure they are packed in there somewhere. We have to get this done today becuase it's going to be 29 tonight!!
 
Back
Top Bottom